Loading...
Serving Cleburne, TX and surrounding areas. (682) 847-7365
Cleburne Concrete Polishing & Epoxy Flooring installs epoxy coatings, polished concrete, and protective floor systems for homes and businesses across Cleburne and Johnson County.
Cleburne Concrete Polishing & Epoxy Flooring installs epoxy coatings, polished concrete, and protective floor systems for homes and businesses across Cleburne and Johnson County.
Cleburne Concrete Polishing & Epoxy Flooring is a Concrete Flooring Contractor serving Cleburne, TX and the surrounding communities. We offer 16 concrete flooring services - from epoxy and polyaspartic coatings to polished concrete, terrazzo, and full surface preparation. Our crews have handled floors in garages, warehouses, commercial kitchens, basements, and pool decks across all 12 cities in our service area. Every job starts with an honest on-site assessment and a written estimate.
Tired of a stained, porous garage slab? Epoxy seals the surface and gives you a floor that wipes clean in minutes.
Learn More
Heavy traffic and chemical spills wreck bare concrete fast. Industrial epoxy creates a tough, cleanable surface that handles real workloads.
Learn More
Oil drips, dust, and damp concrete make garages unpleasant. A quality garage coating turns that rough slab into a space you want to use.
Learn More
Need your garage back the same day? Polyaspartic coatings cure in hours and hold up through North Texas heat better than standard epoxy.
Learn More
Want a floor that looks like polished marble? Metallic epoxy creates a one-of-a-kind swirled finish that works as hard as it looks.
Learn More
Commercial kitchens and food-processing floors need a coating that handles steam, thermal shock, and daily cleaning - urethane cement does exactly that.
Learn More
Rough or dull concrete becomes a smooth, reflective surface that brightens any room and never needs waxing again.
Learn More
Plain concrete floors can look rich and warm. Concrete stain adds permanent color that soaks in and does not peel or chip.
Learn More
Durable, easy to clean, and available in hundreds of color combinations - terrazzo is the flooring choice built to last for decades.
Learn More
Damp, cold basement floors stay that way without the right coating. Seal and finish yours so the space becomes genuinely usable.
Learn More
No coating sticks to a dirty or rough slab. Proper grinding and prep is the step that determines whether a coating lasts one year or ten.
Learn More
Unsealed concrete soaks up spills, stains, and moisture. A penetrating sealer protects the surface from the inside out.
Learn More
Cracked or worn concrete does not have to mean full replacement. Resurfacing gives you a fresh surface at a fraction of the cost.
Learn More
Uneven or sunken floors trip people and make furniture wobble. Self-leveling concrete fills the low spots and creates a perfectly flat surface.
Learn More
Faded or slippery pool decks are a safety issue. A slip-resistant deck coating fixes the hazard and refreshes the look of the whole backyard.
Learn More
Old coatings that are peeling or failing need to come off completely before anything new will stick. We strip it clean so the next job lasts.
Learn MoreReach out by phone or the contact form. We ask a few quick questions - what kind of floor, roughly how big, and what you want to use the space for. We respond within 1 business day and schedule a time to come look at the floor in person. No quote is given over the phone without a site visit.
We walk your floor, check for cracks and moisture, and look at the condition of the concrete. In Cleburne, the moisture check is especially important because of the clay soil and seasonal rain. You get a written estimate that breaks out prep, materials, and labor so you can see exactly what you are paying for.
The crew arrives on the scheduled day, preps the surface properly, and applies the coating. We do a final walkthrough with you before we leave. Most residential jobs are done in a single day, with the floor ready for light use the same evening and vehicle traffic within 24 to 72 hours.
We are registered with the Texas Department of Licensing and Regulation. You can verify our license on the TDLR website before you book. Liability insurance is in place on every project - protecting your property if anything goes wrong.
We never quote over the phone without seeing the floor. We come to you, walk the slab, check for cracks and moisture, and give you a written estimate. There is no charge for the visit and no pressure to book.
We have been working on floors in Cleburne and Johnson County since 2015. We know the local clay soil, the housing stock, and the seasonal conditions that affect how concrete coatings need to be applied here.
Every job comes with a workmanship warranty. If the coating peels, bubbles, or fails due to our installation, we come back and fix it. We would rather earn your repeat business than cut corners and hope you do not notice.
Ready to get started? Request your free estimate or call (682) 847-7365.
"The crew showed up when they said they would and finished the garage in one day. The floor had a lot of cracks from the soil shifting over the years, and they filled every one before putting the coating down. Two years later it still looks exactly the same."
- Marcus T., Burleson - Garage Floor Coatings
"We needed the warehouse floor done between shifts so we could keep the operation running. They phased the job over two days, coating one side while we worked on the other. No downtime, no surprises on the invoice."
- Linda R., Cleburne - Commercial Epoxy Floor Coatings
"My pool deck was faded and getting slippery around the edges. They resurfaced it with a textured coating and the whole backyard looks refreshed. The non-slip finish was the main reason I called - it is noticeably safer now when the kids are running around wet."
- James F., Mansfield - Pool Deck Coatings and Resurfacing
We respond within 1 business day - no waiting around. This estimate is completely free with no obligation to book. After you submit the form, someone from our office will call you to schedule a free on-site visit so we can look at your floor in person and give you an accurate written quote.
(682) 847-7365Cleburne Concrete Polishing & Epoxy Flooring is based in Cleburne, TX and serves 12 communities across Johnson County and the surrounding area - including Burleson, Mansfield, Midlothian, and Granbury. We offer same-week scheduling for most projects and can usually get to your location for an estimate within a few days of your call.
Polyaspartic coatings cure faster and handle high temperatures better than standard epoxy - a real advantage in a Cleburne garage that hits 100 degrees in July. Both are quality options, but the right choice depends on how hot your space gets and how quickly you need it back. The Portland Cement Association at cement.org has good background on concrete coating systems.
Concrete holds moisture even when the surface looks dry. If a contractor skips the moisture test and applies coating over a damp slab, the coating will bubble and delaminate within months. This step is especially important in Cleburne where clay soil can hold water under a slab long after the surface dries.
Hairline cracks and minor surface cracks are normal, especially in North Texas where clay soil shifts with every wet and dry cycle. A good contractor fills those cracks before coating. Actively moving or widening cracks are a different story - they need to be assessed before any coating makes sense.
Concrete coatings are sensitive to temperature and humidity during application. Spring and fall are the ideal windows in Cleburne. Summer heat can cause coatings to cure too fast and trap air bubbles. A contractor who will coat your floor in July afternoon heat without discussing temperature is cutting corners.
Diamond grinding opens up the concrete so the coating can bond. Degreasing removes oil that would otherwise prevent adhesion. These steps take time and equipment, which is why rushed prep jobs fail fast. Ask any contractor you consider to walk you through exactly what their prep process involves.
For most standard residential floor coatings in Cleburne, no permit is required - it is treated as a cosmetic finish. Structural crack repair or drainage changes may be different. The Occupational Safety and Health Administration (osha.gov) also publishes guidelines on safe concrete surface preparation that good contractors follow.
Cleburne Concrete Polishing & Epoxy Flooring is a licensed and insured Concrete Flooring Contractor company based in Cleburne, TX, serving 12 communities across Johnson County and the surrounding area since 2015.
We are registered with the Texas Department of Licensing and Regulation, which licenses contractors performing covered work in Texas. You can verify our license status directly on the TDLR website before you book.
Over the years we have completed hundreds of residential and commercial flooring projects across North Texas - from single-car garage epoxy installs to full warehouse floor coating systems. We offer 16 concrete flooring services and have worked on floors in every community we serve.
If the concrete slab is structurally sound - meaning it is not heaving, crumbling, or sinking - a coating or resurfacing system is almost always more cost-effective than demolition and replacement. Cracks and stains are not reasons to tear out a slab.
A legitimate prep process involves mechanical grinding (not just acid wash), crack filling, degreasing of oil-contaminated areas, and a moisture test. Any contractor who skips the moisture test on a North Texas slab is taking a shortcut that will show up within 12 months.
Ask each contractor to break out the prep work from the coating materials and labor. A low bid that bundles everything together usually means less prep time. The contractor who spends the most time explaining what they found during the site walk is generally the one to trust.
The Concrete Network (concretenetwork.com) is a useful independent resource for comparing coating types and understanding what different processes involve. When you are ready to talk through your specific floor, call us at (682) 847-7365 or request a free estimate online.
Cleburne was founded in 1867 and has served as the county seat of Johnson County ever since. With a population of roughly 32,000, it is a working city with deep roots - not a fast-growing suburb. Most of the housing stock dates from the mid-20th century, which means a lot of concrete driveways, garage slabs, and flatwork have been through decades of North Texas heat, freeze cycles, and clay soil movement. That history is why so many Cleburne homeowners call us: older slabs need more attention, but they are absolutely worth saving.
The city has landmarks most residents know well - the historic downtown square anchored by the Johnson County Courthouse, the Cleburne State Park just outside the city limits, and Pat Cleburne Lake and the Conference Center on the east side of town. Whether your home is near the historic square, out toward the state park, or on a larger lot along the edge of the city, we have worked in your neighborhood.
The Blackland Prairie clay soil under most Cleburne properties is the single biggest factor that shapes concrete work here. That soil shrinks in summer, swells with every spring rain, and causes slabs to crack on a regular cycle. It is not a reason to avoid concrete flooring - it is a reason to hire a contractor who knows how to prepare for it. We have been doing exactly that in Cleburne and across Johnson County since 2015.
By appointment only, no walk-ins.
Cleburne Concrete Polishing & Epoxy Flooring
306 W Wilson St
Cleburne, TX 76033
projects@cleburneconcretepolishingandepoxyflooring.com
Always open, 24/7.
Call Cleburne Concrete Polishing & Epoxy Flooring today for a free on-site estimate - no obligation, and we respond within 1 business day.